Teach you to quickly deal with the effect of temperature on the label
Many people often have the problem that the label sticker is not strong or cannot be attached to the table when applying the label labeling machine. Most people think that this is a problem of machine equipment, so they spend a lot of energy to detect Repair, but finally found that it is still useless. But in fact, after such problems, we must check the labeling once, and then check the self-adhesive labeling machine to see if it is a labeling problem.
When the viscosity of the adhesive label is damaged or reduced, it is very easy to cause the failure of the sticking or unsuccessful sticking. There are many root causes for the stickiness of the label to be low. The most easily overlooked one is the temperature problem.
In a low temperature environment, the viscosity of the self-adhesive label will decrease as the temperature decreases, and if the temperature is too low, it is very easy to cause frostbite of the label adhesive. Therefore, do not store in too cold places when storing stickers. For the lower temperature, you must always ask the manufacturer who provides the label. This is because the quality of the adhesive can directly affect the lower temperature it can withstand. In winter, it is better to apply a better adhesive and store it in a place with a higher temperature. This can ensure the viscosity of the label.
Of course, the temperature of the storage place should not be too high, because if the temperature is too high, the adhesive on the label will start to melt immediately. Although there is no effect on the viscosity, after the adhesive melts, the location of the adhesive distribution will change. In this case, the accuracy of the label sticker may be inaccurate in the case of labeling. After the label is attached to the label sticker, remember to store the product at room temperature for about 10 hours to increase the viscosity of the label and the product.